D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 168 van 761
DGS-6604 m/ mSW Rls. 1.00.029 dot1x re-authentication
CLI Reference Guide
137
dot1x re-authentication
Use this command to enable periodic re-authentication. Use the no form of this
command to disable periodic re-authentication.
dot1x re-authentication
no dot1x re-authentication
Syntax None
Default Disabled
Command Mode Interface configuration
Usage Guideline This command is valid only for physical port interface.
The number of seconds between re-authentication attempts can be configured
using the dot1x timeout command on page 139 with the reauth-period
keyword.
Examples This example enables periodic re-authentication on eth4.1.
This example shows how to disable periodic-re-authentication.
Verify the settings by entering the show dot1x auth-configuration command.
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# dot1x re-authentication
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# no dot1x re-authentication
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
