D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 166 van 761
DGS-6604 m/ mSW Rls. 1.00.029 dot1x port-control
CLI Reference Guide
135
dot1x port-control
Use this command to manually control the authorization state on a specific port.
dot1x port-control { auto | force-authorized | force-unauthorized }
Default auto
Command Mode Interface configuration
Usage Guideline This command is valid only for physical port interface.
Global 802.1x authentication function should be enabled using the dot1x
system-auth-control command on page 138 before enabling 802.1X
authentication on a specific port.
Example This example shows how to deny all access on eth4.1.
Verify the settings with the show dot1x auth-configuration command.
Syntax Description
auto The state (authorized or unauthorized) for a specific port is determined
according to the outcome of the authentication.
force-authorized Specifies to force the port to change to the authorized state. The port allows
access and all authentication packets are ignored.
force-unauthorized Specifies to force the port to change to the unauthorized state. The port is
blocked and all authentication packets are ignored.
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# dot1x port-control force-unauthorized
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
