D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 165 van 761
DGS-6604 m/ mSW Rls. 1.00.029 dot1x pae authenticator
CLI Reference Guide
134
dot1x pae authenticator
Use this command to enable 802.1X authentication on a specific port. Use the no
form of this command to disable 802.1X authentication on the port.
dot1x pae authenticator
no dot1x pae
Default Disabled
Command Mode Interface configuration
Usage Guideline This command is only valid for physical port interface.
Use the dot1x system-auth-control command on page 138 to enable global
802.1x function before enabling 802.1X authentication on a specific port.
A port can be configured as a 1x-enable port only if the port is not a member port
of a port channel, or a destination port of a port mirroring session.
Examples This example shows how to configure port eth4.1 as a 1X-enabled port.
This example shows how to disable 802.1x authentication on port eth4.1.
Verify the settings by entering the show dot1x auth-configuration command.
Syntax Description
authenticator Enable 802.1X authentication on a specific port.
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# dot1x pae authenticator
Switch# configure terminal
Switch(config)# interface eth4.1
Switch(config-if)# no dot1x pae
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
