D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 156 van 761
DGS-6604 m/ mSW Rls. 1.00.029 dot1x auth-mode
CLI Reference Guide
125
dot1x auth-mode
Use the dot1x auth-mode command to specify the 802.1x authentication mode.
dot1x auth-mode {port-based | host-based}
Default port-based mode
Command Mode Interface configuration
Usage Guideline The maximum number of hosts allowed to connect to an 802.1X-enabled port is
project-dependent.
Example The following example shows how to specify the authentication mode as host-
based.
Verify the settings by entering the show dot1x auth-configuration command.
Syntax Description
port-based Specifies the authentication mode as port-based mode. In port-based mode if
one supplicant successfully authenticated, other hosts connected to the same
port are allowed to access the port. Each port implements one authenticator
state machine.
host-based Specifies the authentication mode as host-based mode. In host-based mode,
each host is identified by its MAC address. Only successfully authenticated
hosts are allowed to access the port. Each MAC address implements one
authenticator state machines.
Switch(config)#interface eth4.3
Switch(config-if)# dot1x auth-mode host-based
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
