D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 151 van 761
DGS-6604 m/ mSW Rls. 1.00.029 dos_prevention action
CLI Reference Guide
120
dos_prevention action
Use this command to specify the action to perform when a DoS attack occurs
dos_prevention action {mirror INTERFACE-ID | trap_log }
no dos_prevention action {mirror|trap_log|all}
Default drop
Command Mode Global configuration
Usage Guideline Used to configure actions that the device should take when attacking packets are
received.
The default action is drop and always set to on.
Examples The following example shows how to configure to mirror attacking packets to
eth4.1 port.
The following example shows how to remove all actions.
Syntax Description
action [ACTION] Specifies the action the device should take when an attacking event occurs.
Multiple actions can be specified. The no-form of this command can remove
specific action or all actions.
mirror INTERFACE-ID
Mirror the attacking packets to specific port.
trap_log
The device can be configured to add logs or send traps when attack events
occur. When attacking events occur continually, the logs or traps will be triggered
once every 5 minutes. Note: Currently only logs are supported.
Switch(config)# dos_prevention action mirror eth4.1
Switch(config)# no dos_prevention action all
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
