D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 136 van 761
DGS-6604 m/ mSW Rls. 1.00.029 default-information originate (RIP IPv6)
CLI Reference Guide
105
default-information originate (RIP IPv6)
To originate a default IPv6 route into RIP, use the default-information originate
command. To remove the default IPv6 RIP route, use the no form of this
command.
default-information originate
no default-information originate
Syntax None
Default Disabled
Command Mode Router configuration
Usage Guideline Originating a default IPv6 route into RIP also forces the advertisement of the
route in router updates sent on the interface. The advertisement of the route
occurs regardless of whether the route is present in the IPv6 routing table.
Example The following example originates a default IPv6 route into RIP and advertises the
default route with all other routes.
Switch > enable
Switch # configure terminal
Switch (config) # router ipv6 rip
Switch (config-router) # default-information originate
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
