D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 130 van 761
DGS-6604 m/ mSW Rls. 1.00.029 cos remarking
CLI Reference Guide
99
Use the no cos remarking C-VID command (with optional parameters) to set
the related C-VID as customer CoS trusted at the interface (cos remarking
NEW-COS command is not set at the interface).
Example Please follow the below example for a detailed step by step explanation
1. Go to interface Ethernet 4.1
2. Configure a VLAN encapsulation for C-VID 101-104 to S-VID 1001 and cus-
tomer CoS trusted.
3. Configure COS remarking for all incoming packets at Ethernet 4.1 as priority
of 7.
4. Remark C-VID 101 packet priority as 3, and others use priority 7 remarking.
5. Change the interface as CoS trusted. That is C-VID 101 will be priority
remarking, C-VID 102-104 still remained in customer CoS trusted state, and
interface has been set as Customer CoS trusted.
6. The system will trust all of incoming packets CoS, because C-VID is set as
Customer CoS trusted now.
Verify the settings by entering show vlan-tunnel command.
Siwthc(config)#>interface eth4.1
Switch(config-if)#>vlan encapsulation 1001 101-104
Switch(config-if)#>cos remarking 7
Switch(config-if)#>cos remarking 3 101
Switch(config-if)#>no cos remarking
Switch(config-if)#>no cos remarking 101
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
