D-Link DGS-3224TG handleiding
Handleiding
Je bekijkt pagina 93 van 157
DGS-3224TG Gigabit Ethernet Switch User’s Guide
Switch Information
Figure 7-2. Switch Information (Basic Settings) window
To set basic switch settings, enter a System Name in the first field, the physical location of the switch
in the System Location field, and the name of the contact person responsible for the switch in the
System Contact field. Then click Apply.
The information is described as follows:
• Device Type – A description of the switch type.
• MAC Address – The Ethernet address for the device.
• Boot PROM Version – Version number for the firmware chip. This information is needed for
new runtime software downloads.
• Firmware Version – Version number of the firmware installed on the switch. This can be
updated by using the Update Firmware window in the Reset and Update section.
• H/W Version – Version of the switch hardware.
• System Name – A user-assigned name for the switch.
• System Location – A user-assigned description for the physical location of the switch.
• System Contact – Name of the person to contact should there be any problems or questions
with the system. You may also want to include a phone number or extension.
83
Bekijk gratis de handleiding van D-Link DGS-3224TG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-3224TG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25650 MB |
Caratteristiche Prodotto
| Gewicht | 6000 g |
| Connectiviteitstechnologie | Bedraad |
| Netwerkstandaard | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3U, IEEE 802.3x |
| MAC-adrestabel | 32000 entries |
| Afmetingen (B x D x H) | 441 x 388 x 66 mm |
