D-Link DES-3528 handleiding
Handleiding
Je bekijkt pagina 6 van 525
xStack
®
DES-3528/DES-3552 Series Layer 2 Fast Ethernet Switch CLI Reference Manual
1
1
INTRODUCTION
The Switch can be managed through the Switch’s serial port, Telnet, or the Web-based management agent. The Command Line
Interface (CLI) can be used to configure and manage the Switch via the serial port or Telnet interfaces.
The DES-3528/52 Layer 2 stackable Fast Ethernet Switch Series are members of the D-Link xStack
®
family. Ranging from
10/100Mbps edge switches to core gigabit switches, the xStack switch family has been future-proof designed to provide a stacking
architecture with fault tolerance, flexibility, port density, robust security and maximum throughput with a user-friendly
management interface for the networking professional.
This manual provides a reference for all of the commands contained in the CLI for the xStack
®
DES-3528, DES-3528P, DES-
3528DC and DES-3552 series of switches. Configuration and management of the Switch via the Web-based management agent is
discussed in the User’s Guide.
NOTE: For the remainder of this manual, all versions of the DES-3528, DES-3528P,
DES-3528DC and DES-3552 switches will be referred to as simply the Switch or the DES-
3528/52 Series.
Accessing the Switch via the Serial Port
The Switch’s serial port’s default settings are as follows:
• 115200 baud
• no parity
• 8 data bits
• 1 stop bit
A computer running a terminal emulation program capable of emulating a VT-100 terminal and a serial port configured as above
is then connected to the Switch’s serial port via an RS-232 DB-9 cable.
With the serial port properly connected to a management computer, the following screen should be visible. If this screen does not
appear, try pressing Ctrl+r to refresh the console screen.
DES-3528 Fast Ethernet Switch
Command Line Interface
Firmware: Build 2.00.B033
Copyright(C) 2009 D-Link Corporation. All rights reserved.
UserName:
Figure 1-1. Initial CLI screen
There is no initial username or password. Just press the Enter key twice to display the CLI input cursor − DES-3528:5#. This is
the command line where all commands are input.
Bekijk gratis de handleiding van D-Link DES-3528, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DES-3528 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 62462 MB |
Caratteristiche Prodotto
| Kleur van het product | Zilver |
| Gewicht | 2500 g |
| Stroomvoorziening | 100 - 240VAC, 1.5A, 50/60Hz |
| Stroombron | AC - DC |
| Stroom | 1.5 A |
