D-Link Air DWL-510 handleiding
Handleiding
Je bekijkt pagina 23 van 57
23
• Check that the IP Address, subnet mask, gateway, and DNS settings
are correctly entered for the network
• In Infrastructure mode, make sure the same Service Set Identifier
(SSID) is specified on the settings for the wireless clients and access
points. The SSID factory default setting for the D-Link Air products is
default. (Double-click on the WLAN icon in the taskbar. The Link
Info screen will display the SSID setting.)
• In Ad-Hoc mode, both wireless clients will need to have the same
SSID. Please note that it might be necessary to set up one client to
establish a BSS (Basic Service Set) and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a BSS at the same time, which can result in multiple singular BSSs
being established, rather than a single BSS with multiple clients
associated to it.
• Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting to
an access point and select Ad-Hoc mode when connecting without
an access point. Double-click on the WLAN icon in the taskbar >
click on Configuration to change the settings for the wireless
adapter.
• If Security is enabled, make sure that the correct encryption keys are
entered on both the DWL-510 and the access point. Double-click on
the WLAN icon in the taskbar > click Encryption. Check to see that
the key selected is set to the same key as other devices on the
network.
Bekijk gratis de handleiding van D-Link Air DWL-510, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | Air DWL-510 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11352 MB |
