D-Link AC13U handleiding
Handleiding
Je bekijkt pagina 20 van 40
20D-Link AC13U User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
1. On Windows® 11/10, go to Start> Settings > Network & Internet.
2. Select Wi-Fi > Manage known networks. Choose the network you want to modify, right-click on it, then select Properties.
3. Under IP assignment, select Edit. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet
Protocol Version 6 (TCP/IPv6). Then select Use the Following IP Address.
4. Under Edit network IP settings or Edit IP settings, select Manual. If IPv4 is selected, type the IP address settings in IP address, Subnet prex
length (subnet mask), and Gateway elds. If IPv6 is selected, type the IP address settings in IP address, Subnet prex length, and Gateway
elds. The prex-length in IPv6 has the same function as the subnet mask in IPv4: determine the subnetwork. However, it is expressed as an
integer between 1 through 128 as opposed to four octets in IPv4.
Example: Enter x.x.x.x for IPv4 addressing scheme (where x is between 0 and 255)
and xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx for IPv6 addressing scheme
(where x is a hexadecimal digit).
Set Preferred DNS the same as the LAN IP address of your router.
The Alternate DNS is only optional or you may enter a DNS server from your ISP.
5. When you’re done, click Save.
Bekijk gratis de handleiding van D-Link AC13U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | AC13U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3057 MB |
