CYP WPS-HP201T handleiding
Handleiding
Je bekijkt pagina 24 van 56
17
3) Hyshare Pro Uses the Organization’s Wired LAN:
In this conguration
the Hyshare Pro’s Wi-Fi is completely disabled and uses the
organization’s wired network as the connection point.
Step 1)
Ensure the unit is connected to the same internal network
as your computer via Ethernet cable and connect to the
conguration page using a web browser.
Note: The unit’s IP address can be obtained from the OSD.
Step 2)
Log into the unit as administrator and browse to the Network/Wi-
Fi page. Choose “Hyshare Pro Wi-Fi off” and click the “Apply”
button.
Step 3)
Browse to the Network/Ethernet page and ensure that the unit is
set to “DHCP”.
Note: In some cases, it may be appropriate or necessary to set
the network mode to “Static” and configure the values manually.
Please contact your organization’s IT department if you are
unsure.
Step 4)
Connect the device you wish to share a screen from to the
organization’s network and initiate sharing normally using the
unit’s IP address. (Please see Section 9 for more details)
Bekijk gratis de handleiding van CYP WPS-HP201T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | WPS-HP201T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4886 MB |
