CYP SDV-FTRX handleiding
Handleiding
Je bekijkt pagina 9 van 24
9
6.2 Rear Panel
SFP+DP INHDMI INHDMI OUT
USBIR INIR OUTAUDIOLAN RS-232
TX RX
DC 12V
1110987654321
1
HDMI OUT PORT: Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
2
HDMI IN PORT: Connect to HDMI source equipment such as a media
player, game console or set-top box.
3
DP IN PORT: Connect to DisplayPort source equipment such as a PC,
laptop or set-top box.
4
SFP+ PORT: Insert a standard SFP+ module, and connect the
appropriate optical cable to allow data transmission between
compatible Transmitter/Receiver units or to a 10-gigabit optical fiber
network switch.
Note: Single-mode and multi-mode support is dependent on the SFP+
modules used. Simplex SFP+ modules must use different wavelengths for
each end (e.g. 1330/1270nm).
5
LAN PORT: Connect to an Ethernet supporting device or to your
local network as appropriate to extend the network between the
Transmitter and Receiver.
6
AUDIO PORT:
A
Transmitter Mode: Connect to the stereo analogue output of
a device such as a CD player or PC. The audio signal is passed
directly to the audio port on the connected Receiver.
B
Receiver Mode: Connect to powered speakers or an amplifier for
stereo analogue audio output. The audio signal comes directly
from the audio port on the connected Transmitter.
7
IR OUT PORT: Connect to an IR Blaster to transmit IR signals to devices
within direct line-of-sight of the IR Blaster.
8
IR IN PORT: Connect to an IR Extender to extend the IR control range
Bekijk gratis de handleiding van CYP SDV-FTRX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-FTRX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1706 MB |
