CYP SDV-FTRX handleiding
Handleiding
Je bekijkt pagina 14 van 24
14
Disable: HDCP support is completely disabled.
DEVICE SETTING
2ND LEVEL 3RD LEVEL
Status TRANSMITTER
Receiver
Fan Mode FOLLOW TEMP
Always On
Input INPUT 1
Input 2
Input 3
Local Priority HDMI
DP
OFF
1) Status: Set the operational mode of the Transceiver. After changing
the operation mode, the unit will automatically reboot.
2) Fan Mode: Set the fan’s activation behavior. Selecting “Follow temp”
will result in the fan only turning on if the internal temperature
becomes too high.
3) Input: Select the source to display on the HDMI output. Input 1 is the
local HDMI input, Input 2 is the DisplayPort input, and Input 3 is the
optical fiber streaming video input.
Note: In Transmitter Mode, selecting Input 3 will automatically revert to
Input 1 due to the streaming input not being available.
4) Local Priority: Enable the priority auto switch mode, and select the
input to prioritise, or disable the mode completely. When enabled,
the unit will automatically switch to the designated input if the input
becomes active.
Bekijk gratis de handleiding van CYP SDV-FTRX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-FTRX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1706 MB |
