CYP SDV-FTRX-U handleiding
Handleiding
Je bekijkt pagina 11 van 32
6
6
AUDIO Port:
A
Transmitter Mode: Connect to the stereo analogue output of a
device such as a CD player or PC.
B
Receiver Mode: Connect to powered speakers or an amplifier for
stereo analogue audio output.
Note: The signal is passed directly from the audio port on the
transmitter to the audio port on the receiver in Point-to-Point
configurations.
7
IR OUT Port: Connect to an IR Blaster to broadcast IR signals from a
connected transmitter/receiver to devices within direct line-of-sight
of the IR Blaster.
Note: Currently, only 38KHz IR signal extension is supported.
8
IR IN Port: Connect to an IR Extender to receive IR control signals
and extend them to devices connected to a connected transmitter/
receiver. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
Note: Currently, only 38KHz IR signal extension is supported.
9
SERVICE/USB 2.0 (Mini B) Port:
Connect directly to a standard USB host such as a PC or laptop to
extend their USB functionality to all currently connected/routed USB
devices.
Note: This port is only active when “USB Control Mode” is set to “Device”.
In a Point-to-Point extension configuration, only one transceiver should
be set as a USB Device at a time.
10
RS-232 Terminal Block: Connect directly to a PC, laptop or serial
controllable device with a 3-pin adapter cable to extend the RS-232
signal between a transmitter and receiver.
11
DC 12V Port: Plug the 12V DC power adapter into this port and
connect it to an AC wall outlet for power.
Bekijk gratis de handleiding van CYP SDV-FTRX-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-FTRX-U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2461 MB |
