CYP SDV-CTRX-BD handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 36
14
3) USB Virtual Hub: Enables or disables the simultaneous connection
USB mode which allows the PC/Laptop connected to this unit to be
paired with the USB devices on up to 7 “Host” mode transceivers.
Note: Only available when USB Control Mode is set to “Device”. USB
routing can only be congured by use of the optional IP Master Controller
or control software and is not valid in Point-to-Point congurations.
4) HDMI Out Source: Select the input source to display on the HDMI
output.
5) VOIP Out Source: Select the input source to transmit as an AV over IP
stream.
6) HDMI Out Auto Mode: Enable or disable the HDMI output’s automatic
source selection mode. When enabled, the unit will automatically
switch the input routed to the local HDMI output whenever a new
source is detected or if the current source is lost.
7) VOIP Out Auto Mode: Enable or disable the AVoIP streaming output’s
automatic source selection mode. When enabled, the unit will
automatically switch the input routed to the AVoIP output whenever a
new source is detected or if the current source is lost.
INFORMATION
2ND LEVEL 3RD LEVEL
Resolution [Current Source Resolution]
Status [Current Transceiver Mode]
FW Version [Current Firmware Version]
IP [Current IP Address]
MAC [Unit’s MAC Address]
SN [Unit’s Serial Number]
1) Information: Shows details of the unit’s current status including
detected source resolution, transceiver mode, rmware version, IP
address, MAC address, and serial number.

Bekijk gratis de handleiding van CYP SDV-CTRX-BD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCYP
ModelSDV-CTRX-BD
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2606 MB