CYP SDV-CS8 handleiding
Handleiding
Je bekijkt pagina 9 van 76
4
6
USB Port: Connect a USB mouse and keyboard to control the unit’s
WebGUI displayed on the HDMI output port. Firmware update via USB
is also supported.
Note: Specialised USB control devices, such as a touch panel, should be
connected before the unit is powered on.
7
LAN 2 Port: Connect directly, or through a network switch, to your
PC/ laptop to control the unit via WebGUI/Telnet.
8
LAN 1(POE) Port: This port is used to connect to the SDVoE devices
to be controlled. Connect to the SDVoE units’ private network through
their dedicated network switch, to enable detection and control over
those units.
Note: If the connected network switch supports the IEEE 802.3af 2003
PoE (Power over Ethernet) standard, this unit can optionally be powered
directly via this Ethernet port.
9
FACTORY RESET Pinhole: Press and hold for 3 seconds to reset the
unit to its factory defaults, including Ethernet settings.
Note: While the reset is in process, the LEDs on the front of the unit will
flash. Once the reset is complete, the unit will return to normal operation.
10
DC 5V Port: Plug the 5V DC power adapter into the unit and connect
it to an AC wall outlet for power. (Optional, not required if the unit is
powered via PoE).
6.3 Remote Control
1
PRESET 1~8: Press any of the 8 buttons to activate the saved preset
associated with that number.
1
Bekijk gratis de handleiding van CYP SDV-CS8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-CS8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6049 MB |
