CYP SDV-CS8 handleiding
Handleiding
Je bekijkt pagina 22 van 76
17
Host to Device Pairing: To pair a USB host with a USB device, click
and drag the USB host’s button on the left to the preferred USB
device on the right side, then release the mouse button. If the
pairing was completed successfully, the active USB host’s name will
appear below the USB device’s name within the button. Clicking
on any USB host button will change the colour of itself, and all
currently paired USB device endpoints.
Note: USB devices may also be drag and dropped onto USB hosts to
activate a new pairing.
Stop Host: To stop communication from a USB host, drag the USB
host down to the “Stop” button at the bottom of the window, then
release the mouse button.
USB Device: This section provides drag-and-drop buttons for all
detected USB device endpoints as well as a button target to stop
communication from a device.
Stop Device: To stop communication from a USB device, drag the
USB device down to the “Stop” button at the bottom of the window,
then release the mouse button.
7) IR Routing: Provides drag-and-drop control over the routing of the IR
inputs and outputs detected on all transmitters and receivers.
Note: An IR output can be routed to by multiple IR inputs, however each
IR input may only be directly routed to a single IR output. If an IR input
needs to be sent to more than one output, the Global Broadcast option
must be used.
IR Input: This section provides drag-and-drop buttons for all IR
input ports detected by the system as well as a button target to
stop one or all IR streams from being transmitted.
Bekijk gratis de handleiding van CYP SDV-CS8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-CS8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6049 MB |
