CYP SDV-C2-TX handleiding
Handleiding
Je bekijkt pagina 18 van 36
13
DEVICE SETTING
2ND LEVEL 3RD LEVEL
USB Control Mode Host
DEVICE
USB Virtual Hub
(USB Device Mode only)
OFF
On
HDMI Out Source INPUT 1 (HDMI)
Input 2 (DP)
VoIP Out Source INPUT 1 (HDMI)
Input 2 (DP)
HDMI Out Auto Mode O
AUTO SWITCH
VoIP Out Auto Mode O
AUTO SWITCH
1) USB Control Mode: Enable or disable the USB 2.0 (Mini-B) port for
connection to USB host devices such as a PC or laptop. Selecting
“Device” enables the USB 2.0 (Mini-B) port. Selecting “Host” disables
the USB 2.0 (Mini-B) port.
Note: In a Point-to-Point extension configuration, only one of the two
units should be set to “Device” to avoid conflicts.
2) USB Virtual Hub: Enables or disables the “simultaneous connection”
USB mode which allows the PC/Laptop connected to this unit to be
paired with the USB devices on up to 7 “Host” mode units.
Note: Only available when USB Control Mode is set to “Device”. USB
routing can only be configured by use of the optional IP Master Controller
or control software and is not valid in Point-to-Point configurations.
3) HDMI Out Source: Select the input source to display on the HDMI
output.
4) VOIP Out Source: Select the input source to transmit as an AV over IP
stream.
5) HDMI Out Auto Mode: Enable or disable the HDMI output’s automatic
Bekijk gratis de handleiding van CYP SDV-C2-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-C2-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2509 MB |
