CYP SDV-C2-RX handleiding
Handleiding
Je bekijkt pagina 15 van 32
10
DEVICE SETTING
2ND LEVEL 3RD LEVEL
USB Control Mode HOST
Device
USB Virtual Hub
(USB Device Mode only)
OFF
On
1) USB Control Mode: Enable or disable the USB 2.0 (Mini-B) port for
connection to USB host devices such as a PC or laptop. Selecting
“Device” enables the USB 2.0 (Mini-B) port. Selecting “Host” disables
the USB 2.0 (Mini-B) port.
Note: In a Point-to-Point extension configuration, only one of the two
units should be set to “Device” to avoid conflicts.
2) USB Virtual Hub: Enables or disables the “simultaneous connection”
USB mode which allows the PC/Laptop connected to this unit to be
paired with the USB devices on up to 7 “Host” mode units.
Note: Only available when USB Control Mode is set to “Device”. USB
routing can only be configured by use of the optional IP Master Controller
or control software and is not valid in Point-to-Point configurations.
INFORMATION
2ND LEVEL 3RD LEVEL
Resolution [Current Output Resolu-
tion]
Status RECEIVER
FW Version [Current Firmware Version]
IP [Current IP Address]
MAC [Unit’s MAC Address]
SN [Unit’s Serial Number]
1) Information: Shows details of the unit’s current status including
output resolution, streaming direction status, firmware version, IP
address, MAC address, and serial number.
Bekijk gratis de handleiding van CYP SDV-C2-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | SDV-C2-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2228 MB |
