CYP PUV-44XPL-AVLC handleiding
Handleiding
Je bekijkt pagina 11 van 48
11
6.2 Rear Panel
HDMI IN
IR OUT
HDMI IN
IR OUT
HDMI INIR OUT
CONTROLSERVICE MAIN 24V
IR IN
RS232
HDMI IN
CAT5e/6/7
OUT
IR OUT
IR IN IR IN IR IN IR IN IR OUT
RLRLRLRL
ALL
ZONE
A
A BCD
B C D
AUTO DOWN SCALE
AUTO DOWN SCALE
AUDIO
OUT
HDMI
INPUTS
3 412
1
3 8
42 5 6 7
1
HDMI IN 1~4 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes. DVI sources are
supported with the use of an HDMI to DVI adapter.
IR OUT 1~4 Ports: Connect to IR Blasters to transmit IR signals from
the other end of the HDBaseT connections to devices within direct
line-of-sight of the IR Blaster.
Note: Returning IR signals follow the HDMI signal routing and will also be
output via the ALL IR OUT port. IR signals from the connected HDBaseT
receivers can also be used to control this matrix remotely.
2
CAT5e/6/7 OUT Ports: Connect to compatible HDBaseT Receivers
with Cat.5e/6/7 cables for transmission of all data signals. PoH will also
be supplied to a connected compatible PD Receiver.
Note: Output of 4K signals with 10/12-bit HDR (High Dynamic Range)
colour requires compatible AVLC receivers. If standard HDBaseT receivers
are detected the signal will be automatically converted to 8-bit colour. 4K
sources routed to outputs A & C will be automatically scaled to 1080p if
the connected display can't support 4K.
IR IN A~D Ports: Connect to IR Extenders to receive IR control signals
and extend them to devices connected to the other end of the
associated HDBaseT connection. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
3
ZONE AUDIO OUT A~D Ports: Four sets of analogue stereo audio
outputs. Connect to powered speakers or an amplifier for analogue
stereo audio output from each associated HDBaseT output. (LPCM 2.0
sources only).
4
IR IN (ALL) Port: Connect an IR Extender to this port for IR signal
reception. All IR signals received will be broadcast by all IR blasters
connected to the matrix and to all connected HDBaseT receivers.
Please ensure that the remote being used is within direct line-of-sight
of the IR Extender.
IR OUT (ALL) Port: Connect an IR Blaster to this port to broadcast IR
Bekijk gratis de handleiding van CYP PUV-44XPL-AVLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-44XPL-AVLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3746 MB |
