CYP PUV-2606TX handleiding
Handleiding
Je bekijkt pagina 6 van 24
1
1. INTRODUCTION
This HDBaseT 2.0 Transmitter is a great solution for extending
uncompressed HD audio and video as well as Ethernet and control via a
single run of Cat.5e/6/7 cable over distances of up to 100 meters. Multiple
data and control signal types are supported, including USB 2.0, IR, RS-
232 and LAN connections. An independent analogue stereo audio input
is also provided to enable easy audio signal extension. The HDMI input
supports transmitting resolutions up to a maximum of 4K@30Hz (4:4:4,
8-bit) or 4K@60Hz (4:2:0, 8-bit) over HDBaseT to a compatible Receiver.
When paired with this unit’s standard Receiver, 2 switchable USB 2.0
host (Type B) connections are available (1 on the Transmitter, 1 on the
Receiver) which can connect to devices on up to 6 USB 2.0 (Type A) ports
(3 on the Transmitter, 3 on the Receiver) forming a highly flexible KVM
extension configuration (Note: Only 1 USB host may be active at a time).
This Transmitter (PD) may be powered locally using a standard power
supply, or it can be powered by PoH (Power over HDBaseT) provided by a
compatible Receiver (PSE), allowing for greater flexibility within different
installation scenarios. This unit is controllable via a front panel button and
RS-232.
2. APPLICATIONS
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1× HDMI/USB to HDBaseT Transmitter
1× 3.5mm to IR Blaster Cable
1x 3.5mm to IR Extender cable
1× Shockproof Feet (Set of 4)
1× Operation Manual
Bekijk gratis de handleiding van CYP PUV-2606TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-2606TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1586 MB |
