CYP PUV-1H4HPL-AVLC handleiding
Handleiding
Je bekijkt pagina 14 van 46
14
conversion method based on each output’s EDID.
■
Bypass: Selecting this will allow the source to go to all outputs
without conversion.
■
To YUV420: Selecting this will automatically convert the colour
space of a 4K@50/60Hz source from 4:4:4 to 4:2:0.
■
To 1080p: Selecting this will automatically scale a 4K source to
1080p while keeping the original refresh rate and bit depth.
2) OUT A~E: Assigns the selected 4K conversion mode to each individual
output.
Note: This setting will override the “All” setting.
■
Auto: Selecting this allows the unit to automatically select a 4K
conversion method based on each output’s EDID.
■
Bypass: Selecting this will allow the source to go to all outputs
without conversion.
■
To YUV420: Selecting this will automatically convert the colour
space of a 4K@50/60Hz source from 4:4:4 to 4:2:0.
■
To 1080p: Selecting this will automatically scale a 4K source to
1080p while keeping the original refresh rate and bit depth.
OUTPUT INFORMATION
2ND LEVEL 3RD LEVEL
OUT A~E [Current status of each
output]
1) Output Information: Show the connection status, resolution and
framerate for each output. If no display is connected it will display “Not
Connected”, if no HDBaseT receiver is connected it will display “Not
Linked”.
L/R AUDIO CONTROL
2ND LEVEL 3RD LEVEL
Mute On
OFF
Volume 0~80 [80]
L Enhance 0~40 [0]
Bekijk gratis de handleiding van CYP PUV-1H4HPL-AVLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1H4HPL-AVLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3046 MB |
