CYP PUV-1660TTX handleiding
Handleiding
Je bekijkt pagina 18 van 52
13
be transferred directly to the default download location on your PC.
3) Input EDID: This section provides controls for assigning a new EDID
to one, or all inputs within the system.
Appoint/All: Selecting “All” will allow the assignment of a single
EDID to all inputs simultaneously. Selecting “Appoint” allows for a
different EDID to be assigned to each HDMI input.
EDID Selection: Click on the input button on the left to open the
EDID Table List window. Select the new EDID source to use and the
change will occur immediately across all selected inputs.
Note: In most cases, assigning a new EDID to an input will cause the
affected inputs to briefly blink out while the source adapts to the new
information.
This unit provides the following 6 default EDIDs:
Unit’s default EDIDs
FHD 2CH 1920×1080p@60Hz (4.95Gbps), 8-bit colour,
LPCM 2.0
FHD MCH 1920×1080p@60Hz (4.95Gbps), 8-bit colour,
LPCM 7.1 & Bitstream
UHD 2CH 3840×2160p@30Hz (10.2Gbps), 12-bit Deep
Colour, LPCM 2.0
UHD MCH 3840×2160p@30Hz (10.2Gbps), 12-bit Deep
Colour, LPCM 7.1 & Bitstream
UHD+ 2CH 3840×2160p@60Hz (18Gbps), 12-bit Deep
Colour, LPCM 2.0
UHD+ MCH 3840×2160p@60Hz (18Gbps), 12-bit Deep
Colour, LPCM 7.1 & Bitstream
Note: In some rare cases it is possible for custom or external EDIDs to
cause compatibility issues with certain sources. If this happens, it is
recommended to switch to one of the 6 default EDIDs for maximum
compatibility.
Bekijk gratis de handleiding van CYP PUV-1660TTX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1660TTX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3764 MB |
