CYP PUV-1650TX handleiding
Handleiding
Je bekijkt pagina 48 van 92
48
8. Collaboration Receiver Commands**
COMMAND DESCRIPTION AND PARAMETERS
SET OUT N1 FORMAT N2
Set Rx Output N1’s video format.
N1 = B [HDMI Out on the Rx]
Available values for N2:
1 [DVI Mode]
2 [HDMI Mode]
3 [Auto Detect]
GET OUT N1 FORMAT
Show Rx Output N1’s video format.
N1 = B [HDMI Out on the Rx]
SET OUT N1 BRIGHTNESS N2
Set Rx Output N1’s brightness.
N1 = B [HDMI Out on the Rx]
N2 = 0 ~ 100 [Brightness level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 BRIGHTNESS
Show Rx Output N1’s brightness.
N1 = B [HDMI Out on the Rx]
SET OUT N1 CONTRAST N2
Set Rx Output N1’s contrast.
N1 = B [HDMI Out on the Rx]
N2 = 0 ~ 100 [Contrast level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 CONTRAST
Show Rx Output N1’s contrast.
N1 = B [HDMI Out on the Rx]
SET OUT N1 SATURATION N2
Set Rx Output N1’s saturation.
N1 = B [HDMI Out on the Rx]
N2 = 0 ~ 100 [Saturation level]
Note: Only active when the output timing is
not set to “Bypass”.
Bekijk gratis de handleiding van CYP PUV-1650TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
