CYP PUV-1650RX handleiding
Handleiding
Je bekijkt pagina 51 van 92
51
9. User EDID Commands
COMMAND DESCRIPTION AND PARAMETERS
GET USER EDID NUMBER
List the number of User EDID slots.
GET USER N1 EDID DATA
Show the ASCII HEX data from User EDID N1.
N1 = 1 ~ 4 [User EDID number]
GET USER N1 EDID INFORMATION
Show basic spec information from User
EDID N1.
N1 = 1 ~ 4 [User EDID number]
10. Ethernet Commands
COMMAND DESCRIPTION AND PARAMETERS
SET IP ADDR N1
Set the static IP Address.
N1 = X.X.X.X [X = 0 ~ 255]
GET IP ADDR
Show the current IP address.
SET NETMASK N1
Set the netmask address.
N1 = X.X.X.X [X = 0 ~ 255]
GET NETMASK
Show the current netmask.
SET GATEWAY N1
Set the gateway address.
N1 = X.X.X.X [X = 0 ~ 255]
GET GATEWAY
Show the current gateway.
SET IP MODE N1
Set the IP address assignment mode.
Available values for N1:
1 [Static IP mode]
2 [DHCP mode]
GET IP MODE
Show the current IP mode.
SET HTTP PORT N1
Set the HTTP port for WebGUI access.
N1 = 0 ~ 65535 [Port number]
GET HTTP PORT
Show the current HTTP port.
SET TELNET PORT N1
Set the Telnet port.
N1 = 0 ~ 65535 [Port number]
GET TELNET PORT
Display the device’s Telnet port.
Bekijk gratis de handleiding van CYP PUV-1650RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
