CYP PUV-1650RX handleiding
Handleiding
Je bekijkt pagina 49 van 92
49
8. Collaboration Receiver Commands**
COMMAND DESCRIPTION AND PARAMETERS
GET OUT N1 SATURATION
Show Rx Output N1’s saturation.
N1 = B [HDMI Out on the Rx]
SET OUT N1 HUE N2
Set Rx Output N1’s hue.
N1 = B [HDMI Out on the Rx]
N2 = 0 ~ 100 [Hue level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 HUE
Show Rx Output N1’s hue.
N1 = B [HDMI Out on the Rx]
SET OUT N1 SHARPNESS N2
Set Rx Output N1’s sharpness.
N1 = B [HDMI Out on the Rx]
N2 = 0 ~ 100 [Sharpness level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 SHARPNESS
Show Rx Output N1’s sharpness.
N1 = B [HDMI Out on the Rx]
SET OUT N1 ASPECT RATIO N2
Set Rx Output N1’s aspect ratio.
N1 = B [HDMI Out on the Rx]
Available values for N2:
1 [Full Screen]
2 [16:9]
3 [16:10]
4 [4:3]
5 [Maintain source
aspect]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 ASPECT RATIO
Show Rx Output N1’s aspect ratio.
N1 = B [HDMI Out on the Rx]
Bekijk gratis de handleiding van CYP PUV-1650RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
