CYP PUV-1650RX handleiding
Handleiding
Je bekijkt pagina 31 van 92
31
4. Control System Commands
COMMAND DESCRIPTION AND PARAMETERS
Event
SET EVENT N1 NAME N2
Set the name for Event N1.
N1 = 1 ~ 64 [Event number]
N2 = {Name} [Event name]
GET EVENT N1 NAME
Show the name of Event N1.
N1 = 1 ~ 64 [Event number]
SET EVENT N1 N2
Enable or disable Event N1.
N1 = 1 ~ 64 [Event number]
Available values for N2:
OFF [Event disabled]
ON [Event enabled]
GET EVENT N1
Show the enabled state for Event N1.
N1= 1 ~ 64 [Event number]
SET EVENT N1 TYPE N2
Set Event N1 to event type N2.
N1 = 1 ~ 64 [Event number]
Available values for N2:
1 [Input]
2 [Output]
3 [System Command]
4 [COM Port]
5 [Telnet]
6 [IR]
7 [Ext Trigger]
8 [RTC (Clock)]
GET EVENT N1 TYPE
Show the event type of Event N1.
N1 = 1 ~ 64 [Event number]
GET EVENT N1 PARAMETER
Show the parameters of Event N1
(parameters displayed depend on the Event
type).
N1 = 1 ~ 64 [Event number]
Bekijk gratis de handleiding van CYP PUV-1650RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1650RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6863 MB |
