CYP PUV-1620S-TX handleiding
Handleiding
Je bekijkt pagina 16 van 24
16
Selecting “Info” will show the information display for a few seconds
before automatically turning it o after a source or resolution change.
MISCELLANY
LEVEL 2 LEVEL 3 LEVEL 4
HDCP On Input ON
Off
HDCP On Output FOLLOW OUTPUT
Follow Input
Auto Sync Off DISABLE
Fast
Slow
Auto Input On
OFF
EDID Manage HDMI EDID DEF. 1080P
Def. 4K2K (3G)
Def. 4K2K (4:2:0)
Def. 4K2K (6G)
Output
1) HDCP On Input: Enables or disables HDCP support on the HDMI
input.
2) HDCP On Output: Sets the HDCP version selection logic to use with
the output signal. Selecting “Follow Input” will cause the unit to output
using the HDCP version required by the currently connected source.
Selecting “Follow Output” will always output using the maximum
supported HDCP version reported by the connected receiver.
3) Auto Sync Off: Sets the relative amount of time to continue
outputting black with sync if there is no live source and no operations
have been executed on the unit. Setting this to “Disable” forces the
unit to always output sync.
4) Auto Input: Enables or disables automatically switching on source
loss or when a new live input has been detected.
Bekijk gratis de handleiding van CYP PUV-1620S-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1620S-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1701 MB |
