CYP PUV-1350PL-TXWP handleiding
Handleiding
Je bekijkt pagina 32 van 84
26
Note: RS-232 Automation commands will only be output over the “CTL”
RS-232 port.
Delay: Set the length of time, in seconds, that the specified
Automation Event must continue to be true before sending the
defined RS-232 command.
Wait: Set the length of time, in seconds, to wait after this
Automation Event has been activated before ANY other Automation
Event can be detected.
RS232 Command: Click the Edit icon ( ) to define the RS-
232 command to send when the specified Automation Event
is activated. Click the “Test” button to send the command
immediately.
5) Relay: Enable or disable toggling individual relay settings when the
currently selected Automation Event is activated. Click the “Test”
button to test the relay behavior immediately.
Delay: Set the length of time, in seconds, that the specified
Automation Event must continue to be true before setting the relay
to the state defined by the “Command” setting.
Wait: Set the length of time, in seconds, to wait after this
Automation Event has been activated before ANY other Automation
Event can be detected.
Bekijk gratis de handleiding van CYP PUV-1350PL-TXWP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1350PL-TXWP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5989 MB |
