CYP PUV-1082PL-4K22N handleiding
Handleiding
Je bekijkt pagina 18 van 72
18
HDMI Mirroring command use 1:
If you have rack (head end) based AVRs for surround sound zones we
recommend using the HDMI outputs and the HDMI mirroring mode to
easily have the audio sent to the AVR follow the signal sent to that zones TV.
As long as no further commands are ever sent to the HDMI outputs of the
PUV-1082PL-4K22 you only need to set this up once.
Command Description
HDMI_Out I Mirroring=HDBT_Out A Set HDMI output I to mirror
HDBaseT output A
HDMI Mirroring command use 2:
When using the mirroring function you can use any standard commands
to the selected output and the mirrored HDMI will follow the commands.
This can be an AV Pairing, Video or Audio command etc. A good example
of this is wishing the mirrored HDMI output connected to an AVR to
select an audio only source, for this you send the command to the master
HDBaseT output for the mirrored HDMI output to follow. Remember that
if you’re using the recommended AV Pairing mode this will return both
the audio and the video to the correct selection once a new AV Pairing
command is sent.
Command Description
HDBT_Out A AudioSrc=AnalogIn 2 Set HDBaseT output ‘A’ to Analogue
Line in 2 so the mirrored HDMI
output ‘I’ follows the selection.
Audio command use:
The PUV-1082PL-4K22 oers 8 direct audio only inputs, whilst some of
these input will likely be used for downmixed audio signals from surround
sound sources (for stereo only zones) we expect audio only sources to be
connected to deliver just audio to both TV zones and audio only zones.
Bekijk gratis de handleiding van CYP PUV-1082PL-4K22N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1082PL-4K22N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5585 MB |
