CYP PUV-1082-PRO handleiding
Handleiding
Je bekijkt pagina 57 van 100
57
5) Individual Audio and Video Routing Command Examples
To offer the greatest level of flexibility the matrix can be used to
send individual commands for both video and audio, this allows
the installer to completely tailor the matrix to suit any possible
configuration the end user may require.
Route audio and video from HDMI input 1 to HDBaseT output A
independently:
Command
Description
HDBT_Out A VideoSrc=HDMI_In 1
Video switch command
HDBT_Out A AudioSrc=HDMI_In 1
Audio switch command
6) Combined Audio and Video Routing Command Example
It is also possible to switch audio and video simultaneous by using an
advanced command structure. In this case the individual parameters
of the “HDBT_Out” command are separated by a comma. Please refer
to section 6.10.1 for additional information on how commands can be
combined.
Route audio and video from HDMI input 1 to HDBaseT output A
simultaneously:
Command
Description
HDBT_Out A VideoSrc=HDMI_In 1, AudioSrc=HDMI_In 1
Video and Audio switch command
Every individual audio and video input has a bespoke command
(including separate commands for the audio and video within a HDMI
source).
Bekijk gratis de handleiding van CYP PUV-1082-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1082-PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7212 MB |
