CYP PUV-1082-PRO handleiding
Handleiding
Je bekijkt pagina 52 van 100
52
5) Multi-Parameter Command Format
Use the following syntax to set or change multiple parameters for a
single port. Note that each additional parameter uses the “,” character
for separation and spaces are allowed. The number of parameters
allowed in a single command is limited only by the number of
individual parameters that command has.
Command Format
<Command> {Port} {Param1 [= Value]}, {Param2 [= Value]}, {Etc.}
Examples
ZoneLineOut C Treble = -12, Mute, Delay = 100
HDBT_Out A VideoSrc = HDMI_In 1, AudioSrc = HDMI_In 1
6) Multi-Parameter Command Format (ZoneAvPair)
The “VideoSrc”, “AudioSrc” and “Load” parameters may be combined
on a ZoneAvPair command. Note that the “,” character is used for
separation.
Command Format
ZoneAvPair HDBT_Out {Port} Slot {Slot}
{Param1=Value},{Param2=Value}
Example
ZoneAvPair HDBT_Out B Slot 5 VideoSrc=HDMI_In 2,
AudioSrc=CoaxIn 1
7) Complex Multi-Port/Parameter Command Format
It is possible to have a single command that affects multiple ports
with multiple groupings of parameters. All previously explained syntax
rules must be observed and each additional set of ports/parameters
are separated by the “&” character.
Bekijk gratis de handleiding van CYP PUV-1082-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1082-PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7212 MB |
