CYP PUV-1082-PRO handleiding
Handleiding
Je bekijkt pagina 47 van 100
47
6.7.11 System Settings Tab
This tab provides system configuration options including turning the
power on/off, changing the network settings, downloading/restoring
saved system configurations, resetting the system to factory defaults and
updating the firmware.
■
Power: Press this switch to toggle the unit’s power between ON
and OFF (standby mode).
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
■
Network: The unit’s IP mode may be switched between Static IP
or DHCP. In Static IP mode the IP, netmask and gateway addresses
may be manually set. When in DHCP mode, the unit will attempt
to connect to a local DHCP server and obtain IP, netmask and
gateway addresses automatically. Please press “Save” after making
any changes to the IP configuration or mode.
Note: Note: The unit’s default IP address is 192.168.1.50. If the IP address
is changed then the IP address required for WebGUI and Telnet access will
also change accordingly.
■
Download Current Configuration: Click the “Download” button
to save the current system configuration to your local PC. The
current system configuration will be saved as an XML file.
Bekijk gratis de handleiding van CYP PUV-1082-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PUV-1082-PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7212 MB |
