CYP PRO-F12TX handleiding
Handleiding
Je bekijkt pagina 16 van 28
16
6.4 RS-232 Control
Unit Controlling PC Serial Port Settings
Pin Definition Pin Definition Baud Rate 115200
1 1 Data Bits 8
2 TxD 2 RxD Parity Bit None
3 RxD 3 TxD Stop Bits 1
4 4 Flow Control None
5 GND 5 GND
6 6
7 7
8 8
9 9
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit
and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start, type “cmd” in the search eld, and press
Enter.
Windows XP Click Start > Run, type “cmd”, and press Enter.
Mac OS X Click Go > Applications > Utilities > Terminal.
Once in the Command Line Interface (CLI) type “telnet” followed by the
IP address of the unit (and the port number if it is non-standard) and then
hit “Enter”. This will connect us to the unit we wish to control. Type “help”
to list the available commands. See below for reference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note: If the IP address is changed then the IP address required for Telnet
access will also change accordingly.
Bekijk gratis de handleiding van CYP PRO-F12TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | PRO-F12TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1869 MB |
