CYP OUTX-2100-AVLC handleiding
Handleiding
Je bekijkt pagina 13 van 52
13
IR ALL IN Port: Connect to an IR Extender to receive IR control signals
to be routed to all available IR Outputs on the unit. Ensure that the
remote being used is within direct line-of-sight of the IR Extender.
IR ALL OUT Port: Connect to an IR Blaster to transmit IR signals from
all IR Input ports on the unit to devices within direct line-of-sight of
the IR Blaster.
Note: To avoid potential IR signal corruption, please only send IR
commands from a single IR remote at a time.
4
Redundant Power Supply Modules: Plug AC power cords into both
power supply modules and connect them to an AC wall outlet for
power. The LEDs will illuminate green to indicate the modules are
receiving power and functioning normally. These redundant power
supplies operate in parallel and are hot-swappable to provide mission
critical reliability.
Note: While the unit can operate with only a single power supply, a “power
supply failure” alarm will continuously sound until a properly functioning
second power supply module is installed and powered on.
Bekijk gratis de handleiding van CYP OUTX-2100-AVLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OUTX-2100-AVLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3942 MB |
