CYP OR-M42HC-USB handleiding
Handleiding
Je bekijkt pagina 18 van 40
13
6.4.4 Firmware Update
To update the firmware via USB, insert a USB stick containing the new
firmware into the Service port and do either of the following steps. After
the upgrade is complete, the unit will reboot automatically.
Note: The USB stick must contain, in the root directory, a compatible and
properly named (*.BIN) firmware file.
1)
Front Panel Button:
Insert a USB stick containing the new firmware into the Service
port.
Press and hold the “MODE” button while power up the unit. The
upload will occur immediately.
During the update process, the unit will be flashing the LEDs on the
front of the unit. After the upgrade is complete, the unit will reboot
automatically.
2)
Console Command:
Insert a USB stick containing the new firmware into the Service
port.
Type in console command “set system usb fw update” via Telnet or
RS-232. The upload will occur immediately.
During the update process, the unit will be flashing the LEDs on the
front of the unit. After the upgrade is complete, the unit will reboot
automatically.
Bekijk gratis de handleiding van CYP OR-M42HC-USB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-M42HC-USB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2925 MB |
