CYP OR-DT42-4K22 handleiding
Handleiding
Je bekijkt pagina 9 van 52
4
6.2 Rear Panel
TX RX
AUDIO OUT A
L+ L- GR+R-
AUDIO OUT B
L+ L- GR+R-
DC 5V
CONTROLSERVICERS-232BA4321
HDMI OUTHDMI IN
1 2 5 6
3 4
7 8
1
HDMI IN 1~4 Port: Connect to HDMI source equipment such as media
players, game consoles, or set-top boxes. DVI sources are supported
with the use of an HDMI to DVI adapter.
2
HDMI OUT A~B Port: Connect to HDMI TVs, monitors, or ampliers
for digital video and audio output.
3
AUDIO OUT 5-pin Terminal Blocks A~B: Connect to powered
speakers or an amplier using 5-pin terminal blocks for balanced
stereo analogue audio output.
4
DANTE Port: Connect to a standard Ethernet network switch or
router, which is hosting Dante audio transmitters or receivers, with a
single Cat.5e/6/7 cable for transmission and routing of all available
audio streams.
5
RS-232 3-pin Terminal Block: Connect directly to a PC, laptop, or
other serial control device with a 3-pin adapter cable to send RS-232
commands to control the unit.
6
SERVICE Port: This port is reserved for rmware update use only.
7
CONTROL Port: Connect directly, or through a network switch, to
your PC/laptop to control the unit via Telnet/WebGUI.
8
DC 5V Port: Plug the 5V DC power adapter into this port and connect
it to an AC wall outlet for power.
Bekijk gratis de handleiding van CYP OR-DT42-4K22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-DT42-4K22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4025 MB |
