CYP OR-42SA-4K22 handleiding
Handleiding
Je bekijkt pagina 8 van 44
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI OUTPOWER
AB
XGA
+−
MENU
1080P
ENTER
SERVICE
HDMI IN
4321
A
B
OR-42SA-4K22
1 2 3 4 5 6 7 8
1
POWER BUTTON & LED: Press this button to power on the unit (green
LED) or place it into stand-by mode (red LED).
2
IR RECEIVER WINDOW: Accepts IR signals from the included IR
remote for control of this unit only.
3
HDMI OUT A~B BUTTONS: Press these buttons to sequentially switch
through the available inputs for each output.
4
HDMI IN 1~4 LEDS: These LEDs will illuminate to indicate which
source is currently selected for each output.
5
MENU BUTTON: Press to enter the OSD menu, or to back out from
menu items.
Note: Press and hold the “MENU” button while connecting the power
supply to reset all settings to the factory defaults. Pressing “MENU” and
“+” together will reset the output resolution to XGA (1024×768@60Hz).
Pressing “Menu” and “−” together will reset the output resolution to
1080p@60Hz.
6
+ (PLUS) & − (MINUS) BUTTONS: Press to move up and down or
adjust selections within OSD menus.
7
ENTER BUTTON: Press to conrm a selection within the OSD or to go
deeper into a menu item.
8
SERVICE PORT: This slot is reserved for rmware update use only.
Bekijk gratis de handleiding van CYP OR-42SA-4K22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | OR-42SA-4K22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2941 MB |
