CYP MODX-1616 handleiding
Handleiding
Je bekijkt pagina 29 van 52
29
Note: If the IP address is changed then the IP address required for WebGUI/
Telnet access will also change accordingly.
3) Reset to Default: Press the “Routing Reset” button to reset all I/
O routing configurations to the factory defaults. Press the “Factory
Default” button to reset the unit to its factory default state. After the
factory reset is complete, the unit will reboot automatically.
4) Firmware Upgrade: To update the unit's firmware, click the “Choose
File” button to open the file selection window and then select the
firmware update file (*.bin format) located on your local PC. After
selecting the file, click the “Upgrade” button to begin the firmware
update process. After the upgrade is complete, the unit will reboot
automatically.
5) Power Mode: Press this switch to toggle the unit’s power between ON
and OFF (Standby).
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
6) Device Temperature: Displays the current temperature readings, in
Celsius, from all cards currently installed in the unit.
7) Fan Status: Displays the current operational status of all of the unit’s
cooling fans.
Bekijk gratis de handleiding van CYP MODX-1616, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MODX-1616 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3942 MB |
