CYP MED-AS60 handleiding
Handleiding
Je bekijkt pagina 16 van 32
11
6.4.4 System Tab
Once connected to a unit, this tab provides access to basic unit details
such as model name, serial number, and rmware versions, as well as a
way to reset the unit to its factory defaults, update the primary MCU’s
rmware, and disconnect from the unit. At the top of the page is a Sync
icon ( ) that can be clicked on to force the software to resynchronize with
the unit, if necessary.
1) Connect: Press this button, when not already connected to a unit, to
connect to a unit after selecting an appropriate COM port and baud
rate.
Note: Please refer to section 6.4.2 for more details.
2) Disconnect: Press this button to disconnect the software from a unit.
3) Model Name/Serial Number: Displays the unit’s model name and
serial number.
4) Firmware Versions: Displays the current rmware version of the
primary MCU, hardware module 1, and hardware module 2.
5) Firmware Update: Provides a way to update the primary MCU’s
rmware. To update the rmware, click the “Update” button and the
follow the prompts. When prompted, insert a USB thumb drive, with
a valid rmware le (*.bin format) in the root directory, into the unit’s
USB service port and the update process will begin. After the update
is complete the unit will automatically reboot.
Note: Only the primary MCU’s firmware is updated when using the
software’s firmware update function. In the unlikely event that the
firmware for module 1 and 2 need to be updated, please contact your
authorized dealer for detailed instructions.
Bekijk gratis de handleiding van CYP MED-AS60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MED-AS60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2455 MB |
