CYP MA-401 handleiding
Handleiding
Je bekijkt pagina 24 van 68
18
6.6.4 IR Settings Tab
This tab provides control over the IR interfaces of the unit and how it
interacts with the unit and with devices associated with each input and
output.
1) IR Bypass: Enable or disable basic IR bypass from the front IR window,
to the currently selected input’s IR blaster.
Note: When IR Bypass is enabled, unit-generated IR commands will be
delayed by 100ms to avoid conflict with the bypassed IR command.
2) IR Channel: Sets the IR channel to use with the unit’s dedicated IR
remote control.
Note: The IR channel of the unit and the dedicated IR remote control must
match in order for the unit to be controlled.
3) Input IR Auto Power Control: Enable or disable the Auto Power
Control for the IR blaster associated with each input on the unit.
When enabled, the unit will transmit the appropriate power button IR
command, from the associated input’s IR blaster, any time the unit is
powered on or placed into standby mode.
Note: The device-specific power button IR command must be learned and
stored in the unit for each input. The IR transmission will be delayed by 10
seconds to accommodate the warmup needs of certain devices.
4) Output IR Auto Power Control: Enable or disable the Auto Power
Control for the IR blaster associated with the output on the unit.
When enabled, the unit will transmit the appropriate power button IR
command, from the associated output’s IR blaster, any time the unit is
powered on or placed into standby mode.
Note: The IR transmission will be delayed by 10 seconds to accommodate
the warmup needs of certain devices.
Bekijk gratis de handleiding van CYP MA-401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MA-401 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5309 MB |
