CYP MA-401 handleiding
Handleiding
Je bekijkt pagina 20 van 68
14
1) Audio Source: Select the audio source type (HDMI or ARC) to route to
the amplified analogue output from the dropdown.
Note: If the display connected to the HDMI output does not support ARC,
no audio will be heard when the ARC source is selected.
2) Lip Sync: Allows the correction of lip sync issues by adjusting the
audio delay from 0 to 150ms.
Note: The maximum amount of delay possible depends on the audio
source’s sample rate. The value provided here assumes a 48kHz stereo
source.
3) Amplifier: This unit’s amplified output provides a number of controls
to fine tune the audio performance of connected analogue speakers.
Mute: Mute or unmute the amplified analogue output independent
of the current line out mute setting.
Equaliser Setting: Clicking on this button opens up the Equaliser
window which has adjustment sliders at a variety of commonly
adjusted frequencies from 64Hz to 8kHz. Each slider has an
adjustment range of -10 to 10 decibels.
Volume: Adjusts the volume of the amplified analogue audio
output from 0 to 80. Each step is 0.5dB.
Left/Right Enhance: Allows increasing the volume of the left and
right amplified audio outputs independently. Each output can be
increased by up to an additional 20dB in 0.5dB steps.
4) Line Out Mute: Mute or unmute the analogue headphone jack
output. This setting is independent of the amplified analogue output
mute setting.
Bekijk gratis de handleiding van CYP MA-401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | MA-401 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5309 MB |
