CYP IP-XTREAM-R handleiding
Handleiding
Je bekijkt pagina 31 van 60
31
6.5.9 System Setting Tab
This tab provides system information, power control, network
configuration options, system configuration backup/restore/reset, and
firmware update functions.
1) Power: Press this switch to toggle the unit’s power between ON and
OFF (stand-by mode).
Note: While in standby mode the unit’s WebGUI, Telnet and RS232 controls
are still active.
2) Network: IP mode may be switched between Static IP or DHCP.
In Static IP mode the IP, netmask and gateway addresses may be
manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses
automatically. Please press “Save” after making any changes to the IP
configuration or mode.
Note: The unit’s default IP address is 192.168.1.50. If the IP address is
changed then the IP address required for WebGUI/Telnet access will also
change accordingly.
3) Web Timeout (Minute): Select the length of time to wait before
logging the user out of the WebGUI due to inactivity. Available range
is from 1 to 120 minutes, or disabled.
Bekijk gratis de handleiding van CYP IP-XTREAM-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-XTREAM-R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4563 MB |
