CYP IP-XTREAM-R handleiding
Handleiding
Je bekijkt pagina 24 van 60
24
3) Set EDID Input Content: Click on the input button to open the EDID
Source management window. Select the new EDID source to use, from
the choices on the right, and the change will occur immediately.
Note: In most cases, assigning a new EDID to an input will cause the
affected input to briefly blink out while the source adapts to the new
information.
This unit provides the following 6 default EDIDs:
Unit’s Default EDIDs
FHD/2CH 1920×1080p@60Hz (4.95Gbps) & 8-bit colour,
LPCM 2.0
FHD/MCH 1920×1080p@60Hz (4.95Gbps) & 8-bit colour,
LPCM 7.1 & Bitstream
UHD/2CH 3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 2.0
UHD/MCH 3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 7.1 & Bitstream
UHD
+
/2CH 3840×2160p@60Hz (18Gbps) & Deep Colour
(8/10/12-bit), LPCM 2.0
UHD
+
/MCH 3840×2160p@60Hz (18Gbps) & Deep (8/10/12-bit),
LPCM 7.1 & Bitstream
Note: In some rare cases it is possible for custom or external EDIDs to
cause compatibility issues with certain sources. If this happens, it is
recommended to switch to one of the 6 default EDIDs for maximum
compatibility.
Bekijk gratis de handleiding van CYP IP-XTREAM-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-XTREAM-R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4563 MB |
