CYP IP-XTREAM-R4K handleiding
Handleiding
Je bekijkt pagina 15 van 60
10
2) Static IP Setting: The unit’s static IP address, netmask, and gateway
address can be set here. Press the “Enter” button to begin editing the
address and use the “+” and “-“ buttons to adjust each value. Press the
“Enter” button to store the current number segment and move to the
next segment.
Note: These values can be set even when the unit is in DHCP mode, but
they will not be used until the mode is changed to Static IP.
3) IP: Displays the unit’s current IP address.
4) MAC: Displays the unit’s MAC address.
FACTORY
2ND LEVEL 3RD LEVEL
Reset
1) Reset: Pressing the “Enter” button will cause a reset conrmation
window to pop up. Press the “Enter” button again, within 10 seconds,
to reset all of the unit’s settings back to their factory defaults.
Note: The full reset process can take 10-15 seconds and the unit will
automatically reboot afterwards. Please be patient while it performs the
reset process.
INFORMATION
2ND LEVEL 3RD LEVEL
Model Name [Unit’s Model Name]
SN [Unit’s Serial Number]
Version [Current Firmware
Version]
1) Information: This screen displays information about the unit’s serial
number and the current rmware version.
Bekijk gratis de handleiding van CYP IP-XTREAM-R4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-XTREAM-R4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4339 MB |
