CYP IP-CS9000 handleiding
Handleiding
Je bekijkt pagina 23 van 72
18
USB Device: This section provides drag-and-drop buttons for all
detected USB device endpoints as well as a button target to stop
communication from a device.
Stop Device: To stop communication from a USB device, drag the
USB device down to the “Stop” button at the bottom of the window,
then release the mouse button.
6) IR Routing: Provides drag-and-drop control over the routing of the IR
input and output pairs on all detected transmitters and receivers.
Note: If linked routing for IR is enabled on the target receiver, then all
other linked routing enabled streams will also switch. See section 6.6.5 for
linked routing settings.
IR Transmitter: This section provides drag-and-drop buttons for all
transmitters with IR ports detected by the system.
Transmitter to Single Receiver Routing: To link a transmitter’s IR
input/output pair to a receiver’s pair, click and drag the transmitter’s
button on the left to the preferred display on the right side,
then release the mouse button. If the routing was completed
successfully, the newly routed transmitter’s name will appear below
the display’s name within the button. Clicking on any transmitter
button will change the colour of itself, and all currently routed
displays.
Note: Receivers may also be drag and dropped onto sources to activate
a new route.
Transmitter to Multiple Receiver Routing: To link a transmitter’s
IR input/output pair to multiple receivers at the same time, click
and drag the source’s button on the left to a Group button or the
“All” button on the right side, then release the mouse button. If the
Bekijk gratis de handleiding van CYP IP-CS9000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-CS9000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5938 MB |
