CYP IP-CS9000 handleiding
Handleiding
Je bekijkt pagina 16 van 72
11
if there are a large number transmitters and receivers in the system. Please
do not power off any units during their update process.
IP Master Controller: To update the unit’s rmware click the
“Choose File” button to open the le selection window and then
select an appropriate rmware update le (*.bin format) located
on your local PC. After selecting the le, click the “Upgrade” button
to begin the rmware update process. Once the rmware update
process has completed the unit will reboot.
Transmitter/Receiver: To allow the IP Master Controller to remotely
update the rmware of detected transmitters and receivers, click
the “Choose File” button to open the le selection window and then
select an appropriate rmware update le (*.7z format) located on
your local PC. After selecting the le it will be uploaded into the
system and an “Upload Complete” popup will be displayed once
the process is complete. To update the rmware of ALL detected
transmitters and receivers, click the “Upgrade All” button. This will
begin the rmware update process on all transmitters and receivers.
Once the rmware update process has completed the aected units
will reboot. To update the rmware of an individual unit, go to the
Device Settings of that unit within the Transmitter or Receiver tabs
and select the “Firmware Update” system command.
Note: The transmitter/receiver firmware will be stored within the IP
Master Controller after upload until the firmware is replaced with
another file or the unit is factory reset.
Bekijk gratis de handleiding van CYP IP-CS9000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-CS9000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5938 MB |
