CYP IP-CS7 handleiding
Handleiding
Je bekijkt pagina 14 van 68
9
6.6.1 System Tab
This tab provides access to system configuration options including IP
configuration for both LAN ports, interface language, preview control,
login and user management, and firmware update functionality.
1) LAN 1 & LAN 2: The IP mode for each LAN port (DHCP or Static IP),
IP address, netmask, and gateway can be set here. When a LAN port
is set to “DHCP” mode, it will automatically attempt to obtain proper
configuration information from the local DHCP server. To configure
the network settings manually, please set the LAN port to “Static IP”
mode and enter the information as appropriate for the connected
network. Press “Save” to activate the changes. The MAC address for
each port is also displayed here.
Note: If the devices being controlled have been set to “AutoIP” mode then
LAN 1 should be set to DHCP. With no DHCP server available, LAN 1 will
automatically assign itself an APIPA address from the 169.254.xxx.xxx
range allowing it to discover and control AutoIP devices.
2) System Commands:
Login/Logout: Click these buttons to log into or out of the WebGUI
interface.
Note: When not logged in, only the “Monitor & Control” and “System”
tabs are available.
Change PWD: Click this button to change the WebGUI’s
administrator login password.
Note: The default administrator user name and password is “admin”.
The administrator user name cannot be changed.
Save Config: The current system configuration may be saved as a
*.bin file to the local PC. Click the “Save Config” button to save the
Bekijk gratis de handleiding van CYP IP-CS7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-CS7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6620 MB |
