CYP IP-A750TX handleiding
Handleiding
Je bekijkt pagina 24 van 32
19
COMMAND
Description and Parameters
set audio in 1 mute N1
Set the mute state for all audio inputs.
Available values for N1:
ON [Muted]
OFF [Unmuted]
get audio in 1 mute
Show the current mute state for all audio inputs.
set tx channel N1
Set the Audio over IP (AoIP) transmission channel.
N1 = 0~255 [Channel index value]
get tx channel
Show the current AoIP transmission channel.
set showme N1
Enable or disable the unit’s LEDs blinking to more easily visually identify the
unit.
Available values for N1:
ON [Enabled]
OFF [Disabled]
get showme
Show the current state of the showme function.
set stream cast mode N1
Set the AoIP transmitter’s network broadcast mode.
Available values for N1:
UNICAST [Unicast mode]
MULTICAST [Multicast mode]
get stream cast mode
Show the AoIP transmitter’s current network broadcast mode.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Bekijk gratis de handleiding van CYP IP-A750TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CYP |
| Model | IP-A750TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2131 MB |
